[. . . ] On/off button with booster (max) function* Fine filter Prefilter Dust container Release button Charging indicator light Vacuum cleaning cover 8. Rapido should only be used by adults and only for normal vacuuming in a domestic environment. All servicing and repairs must be carried out by an authorised Electrolux service centre. [. . . ] In order to ensure that it is always ready for use, Rapido should be left on charge when not being used. The adaptor may become warm during charging ­ this is normal. Underneath the charging station there is a hollow space where redundant cable can be wound (13a). Detach the wall unit by unscrewing the screw underneath the floor unit (13c). Remove your vacuum cleaner from the charging station by lifting it straight upwards. The crevice nozzle and small brush are positioned in the charging station (16a)* or underneath the vacuum cleaner (16b)*. Attach the crevice nozzle to the vacuum cleaner to facilitate cleaning of areas difficult to reach or attach the brush for dusting. Every now and then the dust container and the filters need to be cleaned to maintain a high suction power. Release the whole dust container by pushing the release button (18a), remove the filters and empty the contents into a wastepaper basket (18b). Return the filters and press back the dust container until it clicks into place. Pull and release the spring for filter cleaning* 5-6 times to free dust from the filters. Vacuum clean the dust container by placing the hose handle of another vacuum cleaner against the vacuum cleaning hole. The dust container, prefilter and fine filter can be shaken clean or cleaned and rinsed using luke warm water (22b). Open the vacuum cleaning cover (23a) and, using a pair of pliers, remove the shaft to release the wheels (23b). [. . . ] All conformity testing has been done by an independent third party testing body. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. [. . . ]